North Solar Screen: 110 Volt Hardwired Motor with Switch for Solar Shades
North Solar Screen
North Solar Screen, LLC: Energy Saving Solar Shades, Insulated Shades, Cellular Shades, Green PVC Free Solar Screens, Sun Shades, Skylight Shades, Patio Shades, Porch Shades, Outdoor Shades, Light Blocking Shades, Motorized Shades, Outside Shades, Inside Shades and Blinds.
North Solar Screen: Solar Shades and Sun Shades, Skylight Shades, Patio Shades and Blinds
Ideal lift system for heavy shades, high windows or when visible power cords are undesirable.
Powers single or multiple shades and permanent wiring to a junction box.
Motor is inside the roller on right or left your choice. It is designed with preset stops to prevent shade from rolling too high or too low.
Rollers are 1.5", 2" (most common) 2. 38" or 2.75". Diameters determined by factory. Heavy duty brackets are included.
One switch can operate up to 2 motors. With relays one switch can operate up to 100 motorized shades. An isolation control can be used to operate one shade from two switches.
Wall Switch Selections
Single Pole (SP DT): Operates one shade from one switch. Double Pole (DP DT): Operates two shades from one switch. Momentary: The switch must be held in position for the shade to travel up or down. Maintained: Flip the switch and the shade travels up or down to its limit stops no midway point stops.
Switches have a 15 amp rating and are UL rated.
The motors have four wires:
Green = Ground
White = Common
Red = Directional (hot wire)
Black = Directional (hot wire)
To connect to switches, relays and controls, 14/3 or 12/3 wiring is required.
Motors are shipped with 6 feet of wire. Longer wires are available if needed.
PRICING FOR SOMFY 110 VOLT HARDWIRED MOTORS
110 Volt Hardwired Motors
36"-108" (Shade Width)
$425.00$386.00 +the cost of shade
108 1/8"-144" (Shade Width)
$489.00$444.00 +the cost of shade
144 1/8"-168" or Joined Shades
$569.00$515.00 +the cost of shade
Switches (White or Ivory)
Toggle Switch
Rocker
Paddle
Single Switch Maintained or Momentary* (For 1 Shade)
$20.00
$20.00
$23.00
Double Switch Maintained**
(2 Shades from 1 Switch)
$34.00
$34.00
$42.00
*Momentary = The switch must be depressed until the shade reaches the desired point.
**Maintained = Operate the switch and the shade will travel down or up to its limit stops.
One or two shades can be operated from a single switch. With the use of relays, one switch can operated 3-100 shades. Please contact us to design a multiple shade system or to add on extra features. Local wiring codes generally require an electrical contractor to open walls for installation.
OPTIONAL JOINER - MONEY SAVING IDEA
Using a joiner will create a 1 1/4" gap between shades.
Money Saving Idea: With the addition of joiners, one motor can power two or three rollers for a maximum width of 244." The tips of the rollers cannot be more than 2" apart. This concept works only when shades are in exact alignment.
110V HARDWIRED MOTOR TO A SWITCH
