test

Maximum Transparency Solar Shades

The most undistorted outward visibility of any solar shade on the market. They’re customizable in a range of colors and weave densities so you can select the level of visibility, light and insulating qualities right for your space. If you have a heat problem, and want dark colored shades for either better visibility, glare reduction, or to go with your decor, upgrade to High Performance Verosol or EnviroScreen shades.

Maximum Dimensions:
Can be custom made up to these maximum dimensions:
120″w x 96″h
114″w x 114″h
108″w x 138″h
102″w x 144″h

Chain operated,Cordless, or Motorized

greenguard  

Testimonials
“Thanks for all the help your company gave me to make sure these were measured correctly.
We love the shades!..”

 

-GREGG B
Save 10%
On All Shade Purchases
No Order Minimum
Ends September 25th, 2020
Call Now To Order

866-230-4700

We will guide you through the entire process
Maximum Transparency Description

Maximum Transparency Custom Solar Shades provide the most undistorted outward visibility of any fabric on the market. The secret lies in the fineness of the yarns, the uniform coating of the fiberglass and the regularity of the basket weave. Colors closest to white block 30% more heat than darker colors and allow for more natural light. Darker colors give sharper outward visibility and more glare reduction. Available in 5% (95% dense,)10% (90% dense,) 3% (97% dense) and 1% (99% dense.)

  • Flame Retardant – exceeds the U.S. commercial fire ratings.
  • Protect your furnishings and art from fading.
  • Superior Strength and Dimensional Stability – yarns are 36% fiberglass and 64% PVC. They will not stretch, shrink or twist. Shades always hang flat and roll true.
  • Fade Resistant Yarns – color life exceeds all commercial requirements.
  • Anti Bacterial and Non Toxic Materials – Reject mold, bacteria and dry rot.
  • Fiberglass is manufactured from all natural materials: quartz, sand, soda and lime. It is not affected by extreme temperatures. Super fine yarns for maximum undistorted vision.
  • Meets Greenguard Certification for low VOC safe for schools These shades are lead free.
  • Provides daytime privacy only
Care & Warranty

Cleaning & CareWarranty

High Performance Verosol

Click on a section to expand

Hiding the Roller
Reverse Roll

Shade material runs over the front of roller instead of the back. This hides the shade roller but also causes the material to be further away from the window. Also, this does not hide the clutch chain mechanism at the top.

reverse-roll


Plastic Clear Edge Valance

plastic-clear-valance

Valance DetailDetailed Valance View

Fascias
Click the thumbnails below to read more details.

Valance DetailFascia White
Valance DetailFascia Bronze
Fascia BlackFascia Black
Anodized FasciaAnodized Fascia
 Detailed Anodized FasciaAnodized Fascia Inside mount


Lift Systems

Click the thumbnails below to read more details.

RolleaseRollease
RolleaseRollease
BlackBlack
Dark BrownDark Brown
Stainless SteelStainless Steel
White ChainWhite
Grey ChainGrey

 

 

 

 

 

 

image022P Shaped Tension Device

The RollEase continuous clutch/chain control lifts evenly, locks automatically and raises and lowers in one control. The P Shaped tension device or Cord Guide reduces the hazards of child strangulation and entanglement by limiting their access to the cord control.

Rollease Clutches come in white or black. Chain colors are available in white, light gray, bronze, black, steel and nickel. There is an extra charge for steel and nickel chains.


Motorization Options

New Li-ion Rechargeable Battery Motors by Rollease

Single Channel RemoteSingle Channel Remote
15 Channel Remote15 Channel Remote
15 Channel RemoteA.C. Charger
15 Channel Remote15 Cable Connection

 

 

 

Order with the Pulse Hub to control you shades with Alexa.

These radio control rechargeable battery motors are user friendly. They are available in 2 different sizes to accommodate:

MEDIUM: up to 84”w x 84”h
LARGE: up to 120”w x 120”h

The Levelling Control feature allows for precise positioning of multiple shades ensuring perfect alignment. Additionally, a favorite position can be pre-set and recalled at any time. This motor is inside the roller and has a 12V built in Li-ion battery pack with integrated charge management.Depending upon the fabric weight, under normal use, one cycle per day, batteries could last up to a year and a half. Remotes are available either as a 1 channel for a single shade or a 15 channel for multiple shades.

The motor has a little wire that plugs into a cable to recharge. Shades come with 12 feet of cable but you need to purchase the AC charger that plugs into an outlet. There is also a little antenna. Before the first use please charge the motor for 6 hours using the recommended AC charger.

During operation, if the voltage drops to less than 10V the motor will beep 10 times to prompt that it needs to be charged. The motor will stop running when the voltage is lower than 7v and will resume when the voltage is greater than 7. Under normal use (one cycle per day.)

Lithium Ion Battery Motors FAQ’s

SOMFY Battery Operated Radio Motor

Somfy 12V Battery Operated motor with reloadable Battery wand. Operates with handheld or wall mounted single or multi channel remotes. Transformers available to save on batteries, as well as timers for the ultimate in convenience.

  • Powered by a Battery Wand that uses 8 Lithium Batteries. (Batteries are not rechargeable)
  • Multi channel remotes can operate up to 100 shades. The last button opens and closes all simultaneously.
Round Radio HeadRound Radio Head Motor
Reloadable Battery WandReloadable Battery Wand
BlackRadio Remotes
Dark BrownWall Mounted Wireless Switch

 

 

 

 

 

 

 


110V Plug In Motor With Radio Remote

Plug-In-Smart-Motor

Motor plugs into Standard 110V Outlet, shipped with 6 feet of wire and a plug, special order longer wire.
(Do not shorten power cables to less than 42″ because the antenna is in the cable and the motor will not work if the antenna is cut.)

Motor is inside shade roller, on right or left your choice, only power cord sticks out.
Each shade is controlled by a hand held remote or wireless wall switch.
Control single or multiple shades by pressing a button, shade can be set to stop at a mid point or run to the limit stops

Motors use about 1.5 amps, remote range 100 ft.
To hardwire to a junction box install a shut off switch for each motor so you can disconnect each motor from power source to program.

Somfy RemotesSomfy Remotes
Wall ControlWall Control


Magnetic Hold Downs
For regular vertical windows in moving vehicles or surface mounting on doors, Magnetic Hold Downs are available for both Chain shades and Spring Tension shades. Neodymium rare earth magnets  (3.6 pull force) are attached to an adhesive backed aluminum mounting plate.  Install magnets directly on wall or window trim for outside mounts,  or use angle brackets to mount them to the sill for inside mounts. For installation to wood surfaces, remove magnet from plate and secure with a screw.

For spring tension shades, order with the optional metal handle for the bottom bar; this is not necessary for chain pull shades.

Shades up to 36″ wide come with 2 magnets; up to 48″, 3 magnets; up to 60″, 4 magnets.

Specifications
Chain Operated
Our standard no headrail roller offers black or white clutch options with 5 bead chain finishes in white, ivory, black, bronze (metal) and steel (metal) Available in reverse roll.
Skyline hardware is available on a no headrail roller or in a Designer Cassette. Just choose your clutch color; white, satin nickel, ivory, bronze or black. All hardware is color coordinated, including clutch, bracket covers, bead chains and tensioners.  Available in reverse roll.

Cordless
The cordless system is available in white, satin nickel, ivory bronze and black with color coordinating brackets covers for a finished appearance on all cordless roller shades. Cordless is also available with the Designer Cassette

Shade Pulls
Decorative pulls maintain cleanliness and add an enhancing accent to any roller shade. Shade pulls are available in wooden balls, wooden tassels, beehive pulls and droplet pulls.

Dual Roller Shades
Dual Roller Shades are the perfect way to combine the light filtering and blackout fabrics on one set of brackets. The light blocking fabric rolls over the light filtering shade at night when you need privacy.


“Motorization

Simplicity Battery Operated Rechargeable Motors
  • Motor and rechargeable lithium ion battery in motor casing are concealed in roller
  • No special wiring requirements
  • Rechargeable battery comes fully charged from factory, no external battery wand is required
  • Factory programs upper and lower limit stops but does not program channels because that needs to be completed after shade installation.
  • Average battery charge lasts 6-12 months under normal use one cycle per day
  • Battery can be recharged up to 500 times
  • Takes approximately 5 hours to recharge a depleted motor
  • Recharge when shade starts running slow to avoid losing programming
  • Shade will beep when the remote button is pressed.

Measuring Videos
Inside Frame Mount
Outside Frame Mount
Measuring Instructions
Materials needed for measuring
  • Decide whether you want the shade mounted inside the frame of the opening or outside the opening. An inside mount can look cleaner, but if there are obstructions (photo 3) if you want more complete coverage, you may want to order outside mount, or if you want to cover more than one opening with a shade.
  • Always use a steel measuring tape. (photo 1)
  • Measure to the nearest 1/8” (photo 2) Round DOWN, not UP, if it is 1/16th over.
  • Tell us raw measurements. Do not take your own deductions.
  • Always give width before height
  • IT IS ESPECIALLY IMPORTANT to take note if any of the adjoining shades meet at a 90% angle, as one or both shades may need to be cut narrower to make sure the brackets don’t conflict with one another.  We recommend that you order only one of the corner shades, and order the second one after you have installed the first one to make sure the brackets don’t impede each other.
  • And always, feel free to call us for help and email us photos of the site.
Inside Frame Mount
Height and width for measuring inside mount window shades
  • Measure width at top, middle, and bottom (A) Tell us the raw measurements. Let us take the deduction for fit. We will tell you fabric width.
  • Measure the height (B) If not ordering the shade to drop all the way down, let us know.
Outside Frame Mount

To Fit Brackets on Trim/Posts

measuring for outside mount window shades
  • Measure width of the outside of the post to the outside of the post at the top, middle, and bottom (A)
  • Measure width of the inside of the opening (B) to check for fabric overlap. We will tell you fabric width.
  • Measure the height (C) If not ordering the shade to drop all the way down, let us know.
To Order by Fabric Width
Ordering by fabric width diagram
  • Decide where you want the fabric to overlap on each side. Mark on the post/trim and measure this width (A). We will tell you how much room the shade needs to fit.
  • Measure the height (B) If not ordering the shade to drop all the way down, let us know.
To Cover Multiple Openings in a Row
wall of windows for measuring
  • Measure the width of the full span of space you have to fit the shades in at the top, middle, and bottom.
  • Measure the end to center post and center to center post widths at the top, middle, and bottom. Tell us the raw measurements. Let us take the deduction for fit.
  • Measure the width of the inside of the opening to check for fabric overlap. We will tell you fabric width.
  • Measure the height If not ordering the shade to drop all the way down, let us know.
Max Transparency Solar Samples
SKU: N/A.

Max Transparency Solar Samples

$0.00

Click on a swatch color to enlarge then select add to cart below

Clear

E SCREEN MAXIMUM TRANSPARENCY FABRICS

Openness Factor  10%, 5%, 3%, 1%

UV Blockage: Approximately  90%, 95%, 97%, 99%

Colors closest to white stop 33% more heat than darker colors.

We are happy to send you up to FIVE swatches per shade type.

E SCREEN MAXIMUM TRANSPARENCY FABRICS

Openness Factor  10%, 5%, 3%, 1%

UV Blockage: Approximately  90%, 95%, 97%, 99%

Colors closest to white stop 33% more heat than darker colors.

We are happy to send you up to FIVE swatches per shade type.

Installing Indoor Roller Shades – Inside Frame Mount
Installing Indoor Roller Shades – Outside Frame Mount
Comfortex Simplicity Rechargeable Motorization
Programming/Wiring PDF's
Repair/Replace PDFs
Woman owned and operated. Designing Energy Saving Shades since 1992

High Performance Verosol

Click on a section to expand

Specifications

The minimum size of a shade is 12" x 12". The maximum size of a shade depends on the style:

  • Standard roller - 92" wide x 144" high (120" wide x 78 1/2" high railroaded)

Verosol Silver Screen Thermal Solar Shades are shipped with all the necessary hardware. Our brackets are universal so shades can be mounted inside the frame, outside the frame or from the top down. Chain lengths are 3/4's of the way down the shade. Please specify if you need longer chains.

DEPTH REQUIRED

Depth required depends on a combination of width, height, material ordered, lift system, and headrail option. Contact us for specific information about your particular order. Measure depth on double hung windows or sliding windows at the shallowest point. General guideline (Hardware minimums, does not include thickness of fabric. Add 1/8" per 10" of shade height.)

Exposed Roll, Chain or Motor:

  • Up to 90" wide, Side Mount, 2 1/2".
  • Up to 90" wide, ceiling mount, 2".
  • Over 90" Side Mount wide, 3".
  • Over 90" wide, ceiling mount 2".

Exposed Roll, Chain, Commercial

  • Up to 90" wide, Side Mount, 2 1/2".
  • Up to 90" wide, ceiling mount, 2".
  • over 90" wide, side mount: 3"
  • over 90" wide, ceiling mount: 2 5/8"

Exposed Roll, Smooth Lift Cordless:

  • Up to 72" wide,
    • 1 1/2" for ceiling mount;
    • Face mount, 2 1/4".
  • Over 72" wide,
    • 1 3/4" for ceiling mount;
    • Face mount, 2 3/4".

Fascia, Chain or Motorized: 3".

  • Oversized shades require 4", which cannot be motorized.

Designer Cassette , Chain, Motor, or Smooth Lift Cordless:

  • 3 3/4" flush
  • 1" shallow mount

FABRIC WIDTH:
Fabric width varies depending on lift system, shade size, and headrail option. Contact us for specific information about your particular order. General Guidlelines:
Exposed Roll or Fascia with Chain or Motor:

Up to 90" wide,

  • Inside Mount, fabric is 1 5/16" narrower than the ordered width;
  • Outside mount, fabric is 15/16" narrower than ordered width;
  • Side or Exact Mount, fabric is 1 1/8" narrower than ordered width.

Over 90" wide,

  • Inside Mount fabric is 1 5/8" narrower than ordered width;
  • Outside Mount, fabric is 1 1/4" narrower than ordered width;
  • Side or Exact Mount, fabric is 1 7/16" narrower than ordered width.

Exposed Roll, Smooth Lift Cordless Roller:

  • Inside Mount, fabric is 13/16" narrower than ordered width;
  • Outside Mount, fabric is 7/16" narrower than ordered width;
  • Side Mount, fabric is 1 5/16" narrower than ordered width;
  • Exact mount, fabric is 5/8" narrower than ordered width.

Designer Cassette, Chain or Motor:

  • Inside Mount, fabric is 1 1/16" narrower than ordered width;
  • Outside Mount, fabric is 11/16" narrower than ordered width;
  • Side Mount, fabric is 1 9/16" narrower than ordered width;
  • Exact Mount, fabric is 7/8" narrower than ordered width.

Designer Cassette, Chain, Motor:

  • Inside Mount, fabric is 1 1/16" narrower than ordered width;
  • Outside Mount, fabric is 11/16" narrower than ordered width;
  • Side Mount, fabric is 1 9/16" narrower than ordered width;
  • Exact Mount, fabric is 7/8" narrower than ordered width.

Designer Cassette, Smooth Lift Cordless:

  • Inside Mount, fabric is 1 5/8" narrower than ordered width;
  • Outside Mount, fabric is 1 1/8" narrower than ordered width;
  • Side Mount, fabric is 1 1/4" narrower than ordered width;
  • Exact Mount, fabric is 1 7/16" narrower than ordered width

Performance

Double Glazing Black Silver Screen Black Common Screen Dark Grey Silver Screen Dark Grey Common Screen White Silver Screen White Common Screen Beige Silver Screen Beige Common Screen Light Grey Silver Screen Light Grey Common Screen
Solar Transmission - 4% 4% 4% 4% 7% 23% 6% 18% 6% 15%
Solar Reflection Outside - 74% 6%  70% 9% 72% 66% 70% 66% 69% 53%
Light Transmission - 4% 4% 4% 4%

7%

22%

6%

16%

6%

12%
Light Reflection Outside - 72% 6% 69% 10% 70% 74% 68% 65% 68% 58%
UV Transmission - 4%

4%

4%

4%

6%

6%

5%

5%

6%

6%
Openness Factor - 3%

3%

4%

4%

5%

5%

4%

4%

4%

4%
Color Rendering Index - 100

100

100

100

100

94

99

88

99

93
Light Transmission * 78% 3% 3% 3% 3% 6% 15% 5% 14% 5% 11%
g-value* 71% 22% 51% 24% 50% 24% 28% 25% 31% 25% 33%
U-value in W/m2k 2.6 1.5 1.8 1.5 1.8 1.5 1.8 1.5 1.8 1.5 1.8
Width in CM - 220 - 220 - 220

-

220

-

220

-
Weight in g/m2 - 400 - 400 - 400 - 400 - 400 -
Thickness in MM - 0,5 - 0,5 - 0,5 - 0,5 - 0,5 -
FR according to standard NFP 92503 specification M1 - yes - yes - yes - yes - yes -
* Calculation with double clear glazing according to EN 410 and ISO 15099 without ventilation.


Fire Rating

NFP 92503 specification M1
M1 NFPA 701
ISO 6941
BS5867 Part2 type B
These shades are lead free.