Summer Sale “10% off on all Shades” Ends in
Days
Hours
Minutes
Seconds
01 02 03 04 05 06 07 08 427201898

The Solana

Custom Awnings up to 20 feet Wide
The Solana Awning is the best solution for uncovered decks and patios, and are the ultimate in strength and durability. Custom made to your exact width dimensions, they are available in 3 projections (8′, 10′ and 12′) to provide sun and rain protection and extend your outdoor fun time! Choose from a selection of popular Sunbrella fabrics to dress up your space and enjoy the festive LED lights sparkling along the support arms under the canopy.
Motorized (with manual crank back up)
Do not leave down when it’s windy!
Identifying Wind Speed
20’wide x 12’projection (240″ x 144″)
Minimum and Maximum Width at 8′ projection
Minimum 10′ (120″); Maximum 20′ (240″)
Minimum and Maximum Width at 10′ projection
Minimum 12′ (144″); Maximum 20′ (240″)
Minimum and Maximum Width at 12′ projection
Minimum 14′ (168″); Maximum 20′ (240″)
energysaving-icon
exterior-warranty-icon
melanoma-foundation-approved-icon-2
made-in-USA-icon-2
safe-use-icon
greenguard-certified-logo-text
microban-icon-2
I wish to compliment your company, as I am very happy with the Baby Grande Solar shade I recently installed. The quality of the hardware and shade is excellent and the installation was straight forward. Now my wife and I can enjoy our west facing patio despite the sun beating down at times. Keep up the good work!

-GLENN BATH, NEGAUNEE, MI

The Solana Description

The best solution for open patios and decks where a permanent roof is impossible or only needed at certain times of the day. Extend the awning when you want it, and retract it when you don’t! Motorized for ease of operation, and provided with a manual override in case of power outages.

Solana’s are top quality, custom made awnings that are built to last and our industry leading warranty shows it!

Always there when you need it—and not when you don’t!
  • Available in a variety of attractive colors
  • High Quality Sunbrella fabrics
    • Solution dyed for long lasting color
    • Mold and mildew resistant
    • Protective finish with built in stain moisture resistance
    • Easy to clean
  • Festive LED lights for great entertaining
  • Three available projections (8’, 10’, or 12’)
  • Widths up to 20’
  • Vibration detection system retracts awning automatically when windy
  • Available exposed or with semi cassette
  • Fabric width approx 7 1/2″–8″ narrower than overall unit
  • Adjustable shoulders available with exposed awning
  • Four styles of matching valance available with or without cassette

Motorization

Radio Control Motors – Plug In

General Info

5 Year Warranty

  • Waterproof 50NM motor
  • Can choose right or left hand motor side
  • 120v, 2.4 amps
  • Operating temp range 14–104 degrees F
  • 15′ power cord–plug into grounded outlet
    • may be shortened if you add your own plug after cutting
  • Set limit stops on motor head
  • Vibration sensor with 5 levels
    • units come set to recommended level 3
    • Do not leave extended unattended as sensor may not pick up a sudden storm
  • Manual Crank override–use only when there is no power. Do not operate manually beyond the stopper as this will damage the motor and void the warranty

SOLANA Motor Controls

5 Year Warranty

  • One or 5 channel remote provided depending on number of units. 5 channel can operate up to 5 awnings individually.
  • Awnings shipped synced to remote by factory
  • Remote range: Minimum 65′ (could vary, depending on environmental conditions like steel structures, etc.)
  • Remote Battery: 3V (CR2450) Battery life less than 2 years
  • Do not leave remotes outdoors as rain/moisture can cause long term issues
  • Each order includes one hand brace for crank override (48″, 60″ 72″, 84″ or 96″) color to match awning frame
Solana-Motor-5-Channel-Remote-and-Vibration-Sensor-1

SOLANA Construction

Solana-Construction-diagram
An awning should be retracted in windy conditions. Awnings must be mounted to the underside of a beam/ceiling or to the face of a beam/wall. You can roof mount if you have it installed by your roofing contractor. Installing within 3 miles of salt water is considered salty air and changes the warranty on metal parts, not the fabric or motor.
  1. Optional Semi Cassette: Powder coated Aluminum to match the Frame
  2. Order 8′, 10′, or 12’projection
  3. Fabric Cutbacks: The shade material is cut narrower than the roller by approximately 7 1/2″–8″.
  4. Support arms include LED lights
  • Sturdy frames are available in three colors (white, sand, or bronze).
  • Order Adjustable Shoulders (only available with no cassette) if you need to adjust the pitch (angle) of the awning.
  • Metal components: are made of corrosion resistant materials (powder coated aluminum, powder coated steel, stainless steel, or galvanized steel.) If you are close to the sea “with salt air smog” where you can actually taste the salt air, spray all metal parts with fresh water as you would an ocean going boats, even a stainless-steel one.
  • All awnings are motorized and include a vibration sensor to automatically retract the awning when it’s windy.
  • Manual crank operation overrides the motor in case of power out. Operate manually within the limit stops set for the motor.
  • Hand Brace: Each awning ORDER comes with ONE free properly sized hand brace. Color to match awning frame. Available in 48″, 60″, 72″, 84″ and 96″ long. Do not leave out in the sun as constant UV exposure can crack the plastic handle.
  • You will need to supply your own Torx Screws for mounting your awning.

How To Measure Outdoor Shades

Measuring Tips:

  • Use a steel tape measure – Do not use cloth
  • Measure to the nearest 1/8” – Never round up
  • Always give width before height (projection) – Measure in inches
  • Give us raw dimensions. Do not take your own deductions

Always feel free to call us for help and email us photos of where you want to install.

Mounting Options

For more detailed installation instructions see our installation tab

Wall Mount

The awning mounts to the flat wall surface above the area you want to shade.

Minimum Height Required: 9″ flat surface
Minimum height to mount: 100″ from floor
Brackets: 4 wallmount brackets are standard equipment
Minimum Clearance between awning front bar and any obstacle: 20″

Undermount (Ceiling Mount)

The awning mounts from the underside of a beam or soffit.
Minimum Depth Required: 9 1/2″. Must be flat, level and have no protrusions (trim or bolts) within your opening frame.
Minimum height required: 10 1/4″
Minimum height to mount: 100″ from floor
Brackets: 4 ceiling brackets (upcharge)
Minimum Clearance between awning front bar and any obstacle: 20″

Roof mount

The awning mounts on top of your roof.
We recommend you have this installed by a roofing contractor. Not a DIY project.
Roof brackets: 4 roof brackets (upcharge)

Minimum Clearance between awning front bar and any obstacle: 20″

The frame must to be mounted to a sound structure. Ideal placement is no more than 12″ away from awning shoulders on each side. This may vary based on stud placement.

Fabric & frame colors

The Solana

Sunbrella fabrics

Click on a swatch color to enlarge then select add to cart below.

We are happy to send up to 6 swatches.

Solana Frame and Hand Brace Colors
Solana-Frame-colors

Complete Installation PDFs

Please print or download for your needs. Instructions no longer included in packaging.

Motor Programming/Wiring PDFs & Videos

Solana 50NM CMO motor

Schematics (Tech Information) PDFs

summer-sale
summer-sale

Summer Sale Save 10%

On All Shade Purchases | No Order Minimum

Ends in

Days
Hours
Minutes
Seconds

Pricing & Ordering

To order please call us toll free to at 866-230-4700. Our personalized service ends your worries about measuring mistakes.
Shades are shipped with all installation hardware.

Pricing does not include shipping

Motorization Options

Cleaning Outdoor Shades

Sponge with a solution of one cup mild detergent with one cup household bleach in three gallons of water. Avoid rubbing too hard. Rinse thoroughly with clear water and air dry by hanging shade in a roll down position. If you see mildew on the fabric or do not see any but know it is a problem in your area periodically scrub or sponge the fabric with a commercial mildew remover or 1 part bleach to 3 parts water and rinse thoroughly. Avoid skin and eye contact when working with bleach solutions.

The tracks or cables must be hosed down on a regular basis to make sure they are clear of dirt and debris before lifting or lowering the shade, or it will not function correctly. Not doing so will void the warranty.  If installed high up or on a second story, any equipment or labor needed for the initial installation could be needed for cleaning.  We do not cover such labor costs.

For Citadel Zipper Track shades, lubricate the zippers and PVC inserts or the extruded zipper channel (as applicable) inside the rails with a dry silicone spray regularly to ensure smooth operation. Video: How to Lubricate Citadel Tracks This is the lubricant recommended:

Dry-Silicone-spray-Blaster

Blaster Industrial Strength Silicone Lubricant

Packaging and Shipping

If your order is shipping by truck
  • Plan on having 2 able bodied people on site to unload the truck. There will only be one driver and if you use the lift gate there will be a $90 surcharge. This is a liftgate:
  • Make sure we have your daytime phone number in case there’s a problem. The will call you to make a delivery appointment.
  • Be careful how you sign for your shipment. It is imperative that you mark the bill of lading ‘damaged’  or ‘possible internal damage’ and get an ‘exception number’  if there is any sign of damage to the outer packaging,  NO MATTER HOW SMALL. You will have 30 days to report damages if you get an ‘exception number’ for damage to outer package and only 4 days if you do not get this ‘exception number.’  If you fail to do so and there are damaged or missing parts, we will not be able to replace them without charging you. Freight company policies only allow us to replace items and not refund them. You must report to us that the shipment appeared damaged within 24 hours. Include photos of the damaged boxes.
  • Do not change the delivery address for your shipment once it has actually shipped unless you are willing to pay the re consignment fee which is usually about $150
  • Let us know if you are going to be away, even if you don’t think it will be when the shade is due to be delivered. Sometimes shipments are ready earlier or later than expected. Please let us know when you are traveling so we can try to keep the delivery from arriving at the terminal in your absence.  Old Dominion charges storage fees for keeping shipments at the terminal.
  • Do not schedule an installer until you know your shipment is complete and intact. We do not cover installer visits even if they are return visits necessary because of missing or damaged parts.
  • Let us know if your address is hard to get to with a huge truck. Some truck terminals don’t have anything but large semis  (tractor trailers) to deliver. If your address is not accessible by a large semi, you may have to pick up at the terminal yourself. If you do not have a large enough vehicle to pick up and need to rent one, that is your responsibility. If delivery is attempted and the truck cannot make it, you may be charged a re delivery fee.